¡@

Home 

2014/10/16 ¤W¤È 08:26:27

android Programming Glossary: thread_pool_executor

How AsyncTask works in Android

http://stackoverflow.com/questions/10480599/how-asynctask-works-in-android

there two different standard executors SERIAL_EXECUTOR and THREAD_POOL_EXECUTOR . The way how tasks are enqueued also depends on what executor..

Invalid heap address and fatal signal 11

http://stackoverflow.com/questions/10662446/invalid-heap-address-and-fatal-signal-11

contextReference.get .executeOnExecutor AsyncTask.THREAD_POOL_EXECUTOR result i super.onPostExecute result Even though I've tried researching.. source code you're showing. Also have you tried not using THREAD_POOL_EXECUTOR According to the android dev guide When first introduced AsyncTasks..

AsyncTasks do not get collected causing other AsyncTasks to not run

http://stackoverflow.com/questions/11705285/asynctasks-do-not-get-collected-causing-other-asynctasks-to-not-run

any AsyncTasks. I fixed it by changing the executor to THREAD_POOL_EXECUTOR which allows 15 threads to be pooled. But the AsyncTasks still.. . I fixed the problem by putting most AsyncTasks in THREAD_POOL_EXECUTOR but this is just avoiding it. What could be the reason that.. get execute one at a time in serial order. if using THREAD_POOL_EXECUTOR I suppose this is what you refer in the question this allows..

Running multiple AsyncTasks at the same time — not possible?

http://stackoverflow.com/questions/4068984/running-multiple-asynctasks-at-the-same-time-not-possible

Executor Params... version of this method with THREAD_POOL_EXECUTOR however see commentary there for warnings on its use. DONUT..

How AsyncTask works in Android

http://stackoverflow.com/questions/10480599/how-asynctask-works-in-android

you a possibility to run simultaneous tasks if you wish there two different standard executors SERIAL_EXECUTOR and THREAD_POOL_EXECUTOR . The way how tasks are enqueued also depends on what executor you use. In case of a parallel one you are restricted with..

Invalid heap address and fatal signal 11

http://stackoverflow.com/questions/10662446/invalid-heap-address-and-fatal-signal-11

result for int i 0 i result.length i new LastfmGetArtistImages contextReference.get .executeOnExecutor AsyncTask.THREAD_POOL_EXECUTOR result i super.onPostExecute result Even though I've tried researching what's up with this I still find myself lost when.. is made from multiple threads Can't say for sure from the source code you're showing. Also have you tried not using THREAD_POOL_EXECUTOR According to the android dev guide When first introduced AsyncTasks were executed serially on a single background thread...

AsyncTasks do not get collected causing other AsyncTasks to not run

http://stackoverflow.com/questions/11705285/asynctasks-do-not-get-collected-causing-other-asynctasks-to-not-run

says running behind it and after 5 AsyncTasks I can't start any AsyncTasks. I fixed it by changing the executor to THREAD_POOL_EXECUTOR which allows 15 threads to be pooled. But the AsyncTasks still show as running. The AsyncTasks all have InputStreams in.. I believe this is the 5 Thread limit of the SERIAL_EXECUTOR . I fixed the problem by putting most AsyncTasks in THREAD_POOL_EXECUTOR but this is just avoiding it. What could be the reason that these AsyncTasks never stop running and clogging up the Executor.. if using SERIAL_EXECUTOR there is no threadpool and all AsyncTask get execute one at a time in serial order. if using THREAD_POOL_EXECUTOR I suppose this is what you refer in the question this allows up to maximum 128 AsyncTask get execute in parallel. The number..

Running multiple AsyncTasks at the same time — not possible?

http://stackoverflow.com/questions/4068984/running-multiple-asynctasks-at-the-same-time-not-possible

If you truly want parallel execution you can use the executeOnExecutor Executor Params... version of this method with THREAD_POOL_EXECUTOR however see commentary there for warnings on its use. DONUT is Android 1.6 HONEYCOMB is Android 3.0. UPDATE 2 See the comment..