**** CubicPower OpenStack Study ****
# Copyright 2014 VMware, Inc
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
from neutron.openstack.common import excutils
from neutron.openstack.common import log as logging
from neutron.plugins.vmware.vshield.common import (
exceptions as vcns_exc)
LOG = logging.getLogger(__name__)
ENCRYPTION_ALGORITHM_MAP = {
'3des': '3des',
'aes-128': 'aes',
'aes-256': 'aes256'
}
PFS_MAP = {
'group2': 'dh2',
'group5': 'dh5'}
TRANSFORM_PROTOCOL_ALLOWED = ('esp',)
ENCAPSULATION_MODE_ALLOWED = ('tunnel',)
**** CubicPower OpenStack Study ****
class EdgeIPsecVpnDriver():
"""Driver APIs for Edge IPsec VPN bulk configuration."""
**** CubicPower OpenStack Study ****
def _check_ikepolicy_ipsecpolicy_allowed(self, ikepolicy, ipsecpolicy):
"""Check whether ikepolicy and ipsecpolicy are allowed on vshield edge.
Some IPsec VPN configurations and features are configured by default or
not supported on vshield edge.
"""
# Check validation of IKEPolicy.
if ikepolicy['ike_version'] != 'v1':
msg = _("Unsupported ike_version: %s! Only 'v1' ike version is "
"supported on vshield Edge!"
) % ikepolicy['ike_version']
LOG.warning(msg)
raise vcns_exc.VcnsBadRequest(resource='ikepolicy',
msg=msg)
# In VSE, Phase 1 and Phase 2 share the same encryption_algorithm
# and authentication algorithms setting. At present, just record the
# discrepancy error in log and take ipsecpolicy to do configuration.
if (ikepolicy['auth_algorithm'] != ipsecpolicy['auth_algorithm'] or
ikepolicy['encryption_algorithm'] != ipsecpolicy[
'encryption_algorithm'] or
ikepolicy['pfs'] != ipsecpolicy['pfs']):
msg = _("IKEPolicy and IPsecPolicy should have consistent "
"auth_algorithm, encryption_algorithm and pfs for VSE!")
LOG.warning(msg)
# Check whether encryption_algorithm is allowed.
encryption_algorithm = ENCRYPTION_ALGORITHM_MAP.get(
ipsecpolicy.get('encryption_algorithm'), None)
if not encryption_algorithm:
msg = _("Unsupported encryption_algorithm: %s! '3des', "
"'aes-128' and 'aes-256' are supported on VSE right now."
) % ipsecpolicy['encryption_algorithm']
LOG.warning(msg)
raise vcns_exc.VcnsBadRequest(resource='ipsecpolicy',
msg=msg)
# Check whether pfs is allowed.
if not PFS_MAP.get(ipsecpolicy['pfs']):
msg = _("Unsupported pfs: %s! 'group2' and 'group5' "
"are supported on VSE right now.") % ipsecpolicy['pfs']
LOG.warning(msg)
raise vcns_exc.VcnsBadRequest(resource='ipsecpolicy',
msg=msg)
# Check whether transform protocol is allowed.
if ipsecpolicy['transform_protocol'] not in TRANSFORM_PROTOCOL_ALLOWED:
msg = _("Unsupported transform protocol: %s! 'esp' is supported "
"by default on VSE right now."
) % ipsecpolicy['transform_protocol']
LOG.warning(msg)
raise vcns_exc.VcnsBadRequest(resource='ipsecpolicy',
msg=msg)
# Check whether encapsulation mode is allowed.
if ipsecpolicy['encapsulation_mode'] not in ENCAPSULATION_MODE_ALLOWED:
msg = _("Unsupported encapsulation mode: %s! 'tunnel' is "
"supported by default on VSE right now."
) % ipsecpolicy['encapsulation_mode']
LOG.warning(msg)
raise vcns_exc.VcnsBadRequest(resource='ipsecpolicy',
msg=msg)
**** CubicPower OpenStack Study ****
def _convert_ipsec_site(self, site, enablePfs=True):
self._check_ikepolicy_ipsecpolicy_allowed(
site['ikepolicy'], site['ipsecpolicy'])
return {
'enabled': site['site'].get('admin_state_up'),
'enablePfs': enablePfs,
'dhGroup': PFS_MAP.get(site['ipsecpolicy']['pfs']),
'name': site['site'].get('name'),
'description': site['site'].get('description'),
'localId': site['external_ip'],
'localIp': site['external_ip'],
'peerId': site['site'].get('peer_id'),
'peerIp': site['site'].get('peer_address'),
'localSubnets': {
'subnets': [site['subnet'].get('cidr')]},
'peerSubnets': {
'subnets': site['site'].get('peer_cidrs')},
'authenticationMode': site['site'].get('auth_mode'),
'psk': site['site'].get('psk'),
'encryptionAlgorithm': ENCRYPTION_ALGORITHM_MAP.get(
site['ipsecpolicy'].get('encryption_algorithm'))}
**** CubicPower OpenStack Study ****
def update_ipsec_config(self, edge_id, sites, enabled=True):
ipsec_config = {'featureType': "ipsec_4.0",
'enabled': enabled}
vse_sites = [self._convert_ipsec_site(site) for site in sites]
ipsec_config['sites'] = {'sites': vse_sites}
try:
self.vcns.update_ipsec_config(edge_id, ipsec_config)
except vcns_exc.VcnsApiException:
with excutils.save_and_reraise_exception():
LOG.exception(_("Failed to update ipsec vpn configuration "
"with edge_id: %s"), edge_id)
**** CubicPower OpenStack Study ****
def delete_ipsec_config(self, edge_id):
try:
self.vcns.delete_ipsec_config(edge_id)
except vcns_exc.ResourceNotFound:
LOG.warning(_("IPsec config not found on edge: %s"), edge_id)
except vcns_exc.VcnsApiException:
with excutils.save_and_reraise_exception():
LOG.exception(_("Failed to delete ipsec vpn configuration "
"with edge_id: %s"), edge_id)
**** CubicPower OpenStack Study ****
def get_ipsec_config(self, edge_id):
return self.vcns.get_ipsec_config(edge_id)